site map | search

HVAC Silicon Nitride Hot Surface Igniters
Silicon Nitride BenefitsFrequently Asked QuestionsWhere to BuyUniversal Igniters400 Series Igniters600 Series IgnitersSmart-lite Igniter
Universal 80v Round Silicon Nitride Hot Surface Igniter Technical Data
technical data
fitting instructions
types replaced
Universal 80v Round Silicon Nitride Hot Surface Igniter
Universal Round Igniter part no. HSIURK80v
Igniter heating element is an all ceramic (Si3N4) product. It uses complex multi-layer moulding and sintering techniques.
Silicon Nitride heating element
Heater cemented into ceramic insulator using white ceramic cement
Bracket stainless steel 304 - bright finish
Ceramic insulator body glazed 95% alumina - polished finish
Cable - PTFE U/L Specification - temperature rating 250șC

Specification
Time to 1200șC
< 6 seconds @ 80 volt
Operating Voltage
80 volts +10% -15%
Power Rating
120 watts
   
 
© 2011 direct brand limited | trademarks - ignitersdirect™ silicon nitride hot surface igniters | terms
Direct Brand Limited, 11b Depot Street, South Grafton MA 01560, T 508-839-0013, F 508-519-0397 is a member of HARDI