site map | search

HVAC Silicon Nitride Hot Surface Igniters
Silicon Nitride BenefitsFrequently Asked QuestionsWhere to BuyUniversal Igniters400 Series Igniters600 Series IgnitersSmart-lite Igniter
Smart-Lite Silicon Nitride Hot Surface Igniter Technical Data
technical data
fitting instructions
types replaced

Smart-Lite Silicon Nitride Hot Surface Igniter

Smart-Lite part no. SLURK24v
Silicon Nitride heating element
NiChrome flame sensor

Heater cemented into ceramic insulator using white ceramic cement
Bracket spring steel - bright finish
Ceramic insulator body glazed 95% alumina - polished finish
Cable - PTFE - U/L Specification - temperature rating 250șC
Specification

Time to 1200șC

> 2.0 seconds @ 24 volt

Cold Resistance

5.0 ± 1.0 Ohms @ 25°C

Operating Voltage

24 volts +10% -15%

Power Rating

30 watts
   
 
© 2011 direct brand limited | trademarks - ignitersdirect™ silicon nitride hot surface igniters | terms
Direct Brand Limited, 11b Depot Street, South Grafton MA 01560, T 508-839-0013, F 508-519-0397 is a member of HARDI