The
igniter heating element (illustrated right) is an all ceramic
(Si3N4) product. It uses complex multi-layer moulding and
sintering techniques.
The
igniter has a much larger glowing portion than anything currently
available, giving a better opportunity of ignition.
|
|
|
Silicon Nitride heating element
NiChrome
flame sensor
Heater cemented into ceramic insulator using white ceramic
cement
Bracket spring steel - bright finish
Ceramic insulator body glazed 95% alumina - polished finish
Cable
- PTFE - U/L Specification - temperature rating 250șC
| Specification |
|
Time
to 1200șC |
>
2.0 seconds @ 24 volt |
Cold
Resistance |
5.0
± 1.0 Ohms @ 25°C |
Operating
Voltage |
24
volts +10% -15% |
Power
Rating |
30
watts |
| |
|
|
|
|
