The
igniter heating element (illustrated right) is an all ceramic
(Si3N4) product. It uses complex multi-layer moulding and
sintering techniques.
The
igniter has a much larger glowing portion than anything currently
available, giving a better opportunity of ignition.
|
|
|
What is a silicon nitride Hot Surface Igniter?
A stronger igniter that has been designed to take the
place of any type of silicon carbide igniter.
What
is the difference between this igniter and the one in
my appliance?
It uses the latest ceramic technology.
Can
these igniters be used for any other appliance other than
those listed?
No, these igniters are designed for use with the appliances
listed, and should not be used in any other application.
However, further products will be added.
I
have fitted an igniter and it's defective. How do I get
a replacement?
In the unlikely event of a failure, simply return the
igniter to your wholesaler together with proof of purchase
for a replacement. Any problems email Igniters Direct.
| Specification |
|
Time
to 1200șC |
>
2.0 seconds @ 24 volt |
Cold
Resistance |
5.0
± 1.0 Ohms @ 25°C |
Operating
Voltage |
24
volts +10% -15% |
Power
Rating |
30
watts |
| |
|
|
|
|
