|
Moulded
in one
using slip casting machines. The part is then sintered in
a vacuum furnace
|
|
 |
Our
igniter heating element (illustrated left) is an all
ceramic (Si3N4) product. It uses complex multi-layer
moulding and sintering techniques.
Silicon
Nitride heating element
Heater
cemented into ceramic insulator using white ceramic cement
Bracket
stainless steel 304 - bright finish
Ceramic
insulator body non glazed 95% alumina - polished finish
Cable
- PTFE U/L Specification - temperature rating 250șC
| Specification |
|
Time
to 1200șC |
<
6 seconds @ 120 volt |
Cold
Resistance |
16-60
ohms @ 25șC |
Operating
Voltage |
120
volts +10% -15% |
Power
Rating |
100-160
watts |
|
|
|
|
|
|
|
Designed
to replace over 100 types of furnace, boiler or water
heater igniter.
A universal replacement silicon nitride igniter - a
robust new technology with low
energy consumption.
|
|
|
