Igniter
Specification
The heating element (illustrated right) is a unique all ceramic
(Si3N4) product.
The
glo-stix™ consists of a tungsten wire element fused between
2 Silicon Nitride plates. The igniter is impervious to moisture |
|
|
Silicon Nitride heating element
Bracket passive plated mild steel
Ceramic insulator body glazed 95% alumina - glazed finish
Cable
- PTFE - U/L Specification - temperature rating 250°C
bracket kit
| Specification |
|
Time
to 1200¼C |
>
12 seconds @ 120 volt |
Current |
3.3-4.2
amps |
Operating
Voltage |
120
volts +10% -15% |
Power
Rating |
400-500
watts |
Note. This unit cannot be used as a flame sensor. |
|
|
|
.jpg)